Easily Manage Employee Safety Training

Sign Up and Try it For Free

Sign Up and Try it For Free

Schedule Employee Training that can be taken 24/7

Schedule Employee Training that can be taken 24/7

Track & Document Employee Progress

Track & Document Employee Progress

Current Courses

Abrasive Wheels

Course Description: This course is based on OSHA standard 29.CFR 1910.215 and 1926.303

Course Objective: To ensure all employees know how to eliminate all hazards related to abrasive wheel use.

Estimated Length of Course: 41 minutes

Course Cost: 15 Credits

As low as $10.80 per employee

More details


Aerial Lifts

Course Description: This course is based on OSHA standard 29 CFR 1926.453

Course Objective: To ensure all employees using aerial lifts understand how to safely operate the equipment in a work situation.

Estimated Length of Course: 15 minutes

Course Cost: 10 Credits

As low as $7.20 per employee

More details


Assured Equipment Grounding/GFCI

Course Description: This course is based on
OSHA standards 29 CFR 1926.404(b).

Course Objective: To ensure all employees understand the procedures needed to protect them from an electrical ground fault by using ground fault circuit interrupters or an assured equipment grounding conductor
program.

Estimated Length of Course: 31 minutes

Meets *ISNetworld® safety training requirements   

Course Cost: 12 Credits

As low as $8.64 per employee

More details


Benzene Awareness

Course Description: This course is designed to provide training regarding OSHA standard 29 CFR 1910.1028.

Course Objective: To communicate the hazards of benzene; where you may be occupationally exposed and steps to limit your exposure.

Meets *ISNetworld® safety training requirements   

Estimated Length of Course: 29 minutes

Course Cost: 10 Credits

As low as $7.20 per employee

More details


Bloodborne Pathogens

Bloodborne Pathogens Course Description

Course Description:This course is based on OSHA standard 29.CFR 1910.1030

Course Objective: To ensure all employees are knowledgeable in the protection against occupational exposure to blood and other potentially infectious materials.

This training is required annually.

Estimated Length of Course: 75 minutes

Meets *ISNetworld® safety training requirements

Course Cost: 20 Credits

As low as $14.40 per employee

More details


Box Cutter and Other Sharp Tools

Course Description: This course is to designed to train in the basic precautions for the safe use of sharp hand tools.

Course Objective: To ensure all employees are aware of the hazards associated with box cutters and other sharp hand tools.

Estimated Length of Course: 27 minutes

Course Cost: 10 Credits

As low as $7.20 per employee

More details


CalOSHA Heat Illness

Course Description:This course is based on Cal-OSHA standard T8 CCR3395

Course Objective: To ensure all employees are aware of the signs and symptoms of heat illness and the requirements to prevent them.

Estimated Length of Course: 30 minutes

Meets *ISNetworld® safety training requirements   

Course Cost: 12 Credits

As low as $8.64 per employee

More details


Cold Stress Prevention Training

Course Description: This course is designed to help you recognize potential hazards from cold stress and the proper measures to protect yourself from these hazards.

Course Objective: To communicate the employer's policy and procedures regarding cold stress safety.

Estimated Length of Course: 30 minutes

Meets *ISNetworld® safety training requirements

Course Cost: 10 Credits

As low as $7.20 per employee

More details


Compressed Gas Cylinders Training

Course Description: This course is to designed to train in the basic precautions for the safe transportation, storage, inspection and use of compressed gas cylinders.

Course Objective: To ensure all employees are aware of the hazards associated with compressed gas cylinders.

Estimated Length of Course: 35 minutes

Course Cost: 12 Credits

As low as $8.64 per employee

More details


Compressed Air and Pneumatic Tools

Course Description: This course is based on OSHA's standards 29 CFR 1910.101; 1910.242; 1910.169; 1926.302 and 1926.306

Course Objective: Provide employees with the knowledge of hazards associated with compressed gases and tools operated by compressed air.

Estimated Length of Course: 45  minutes

Course Cost: 15 Credits

As low as $10.80 per employee

More details


Disciplinary Awareness Training

Course Description: This course is based on OSHA's requirement for employees to enforce employee safety.

Course Objective: To communicate the employer's policy and procedures regarding enforcement of employee safety.

Estimated Length of Course: 25 minutes

Meets *ISNetworld® safety training requirements

Course Cost: 10 Credits

As low as $7.20 per employee

More details


Driving Safety and Company Vehicles

Course Description: This course is based on safe driving behavior.

Course Objective: To ensure all employees understand the promotion of safe driving behaviors as well as the company's safety policies regarding company vehicles.

Estimated Length of Course: 30 minutes

Meets *ISNetworld® safety training requirements   

Course Cost: 10 Credits

As low as $7.20 per employee

More details


Drug and Alcohol-Free Workplace Training

Course Description: This course is designed to make aware of your company's drug and alcohol policy and the hazards produced by the use and misuse of drugs and alcohol.

Course Objective: To ensure all employees know their company's drug and alcohol policy and recognize the signs of use and/or misuse of drugs and alcohol.

Estimated Length of Course: 30 minutes

Course Cost: 10 Credits

As low as $7.20 per employee

More details


Emergency Action Plan Training for General Industry

Course Description: This course is based on
OSHA standards 29.CFR 1910.38; 1910.39.

Course Objective: To ensure all employees understand the required procedures if an emergency situation occurs at the job site.

Topics covered in this course include:

  • Elements of an emergency action plan
  • Training requirements

Meets *ISNetworld® safety training requirements   

Estimated Length of Course: 25 minutes

Course Cost: 10 Credits

As low as $7.20 per employee

More details


Eye Protection

Course Description: This course is designed to provide training regarding OSHA standard 29 CFR 1910.133 and 1926.102.

Course Objective: To familiarize you with the wide selection of eye and face protection to be able to select and use the appropriate protection.

Meets *ISNetworld® safety training requirements   

Estimated Length of Course: 36 minutes

Course Cost: 12 Credits

As low as $8.64 per employee

More details


Fatigue Management Training

Course Description: This course is designed to help you recognize potential hazards from fatigue at the workplace and the proper ways to prevent fatigue from occuring.

Course Objective: To communicate the employer's policy and procedures regarding fatigue prevention.

Estimated Length of Course: 25 minutes

Course Cost: 10 Credits

As low as $7.20 per employee

More details


Fire Safety Training

Course Description: This course is based on OSHA Standard 29 CFR 1926.150, 1926.252 & 1926.24

Course Objective: To provide employees general knowledge on fire protection and prevention, including use of fire extinguishers. 

Estimated Length of Course: 30 Minutes

Meets *ISNetworld® safety training requirements

Course Cost: 10 Credits

As low as $7.20 per employee

More details


First Aid Awareness

Course Description: This course is based on general requirements of OSHA Standard 29 CFR 1926.50

Course Objective: Provides employee awareness on proper procedures to take in performing First Aid in the workplace, and are familiar with the company's Emergency Action Plan.

Estimated course length: 20 minutes

Meets *ISNetworld® safety training requirements

Course Cost: 10 Credits

As low as $7.20 per employee

More details


Forklift Operator Training (Powered Industrial Truck)

Course Description: This course is based on OSHA Standard 29 CFR 1910.178

Course Objective: To provide the forklift operators with the necessary training to meet OSHA regulatory requirements.

Estimated course length: 45 minutes

This training is required every 3 years.

Course Cost: 18 Credits

As low as $12.96 per employee

More details


General Waste Management

Course Description: This course is based on *ISNetworld® safety program requirements to manage the disposal of waste.

Course Objective: To provide employees with an awareness of general waste management procedures and outline the responsibilities of the General Waste Management Officer.

Estimated Course Length: 22 minutes

Meets *ISNetworld® safety training requirements

Course Cost: 10 Credits

As low as $7.20 per employee

More details


Hand & Power Tools

Course Description: This course is based on OSHA standard 29 CFR 1926 Subpart H, 1926.300-1926.302.

Course Objective: To ensure all employees are trained in the proper use of Hand and Portable Powered Tools on the job site.

Estimated Course Length: 23 minutes

Course Cost: 10 Credits

As low as $7.20 per employee

More details


Hazard Communication Including GHS

Course Description: This course is based on OSHA standard 29 CFR 1910.1200

Course Objective: To ensure that contractors are made aware of physical and health hazards present in the workplace as well as what protective measures to take to ensure safety among those hazards.

Estimated Course Length 48 minutes

Meets *ISNetworld® safety training requirements

Course Cost: 15 Credits

As low as $10.80 per employee

More details


Heat Illness Prevention

Course Description: This course is designed to help you recognize potential hazards from heat illness and the proper measures to protect yourself from these hazards.

Course Objective: To communicate the employer's policy and procedures regarding heat illness prevention.

Estimated Length of Course: 30 minutes

Meets *ISNetworld® safety training requirements

Course Cost: 10 Credits

As low as $7.20 per employee

More details


Hydrogen Sulfide H2S Awareness Training

Course Description: This course is based on OSHA Standard 29 CFR 1910.1000 and 1926.55

Course Objective: To provide employees the ability to recognize H2S hazards and how to protect themselves from them.

Estimated course length: 25 minutes

Course Cost: 10 Credits

As low as $7.20 per employee

More details


Incident Investigation

Course Description: This course is designed to show you how to use a 4 step approach to incident investigation.

Course Objective: To communicate the employer's policy and procedures regarding incident investigations.

Estimated Length of Course: 32 minutes

Meets *ISNetworld® safety training requirements

Course Cost: 12 Credits

As low as $8.64 per employee

More details


Ladder Safety

Course Description: This course is based on OSHA standard 29 CFR 1926.1053.

Course Objective: To ensure all employees are trained in the proper use of ladders in the job site. 

Estimated Course Length 26 minutes

Meets *ISNetworld® safety training requirements

Course Cost: 12 Credits

As low as $8.64 per employee

More details


Lockout Tagout

Course Description: This course is based on OSHA standard 29 CFR 1910.147

Course Objective: To ensure that employees are made aware of how to be in compliance with OSHA's standard on the control of hazardous energy, one of the most commonly violated standards.

Estimated Course Length: 65 minutes

Course Cost: 18 Credits

As low as $12.96 per employee

More details


Manual Lifting

Course Description: This course is based on correct manual lifting techniques.

Course Objective: To ensure all employees understand how to identify the hazards of manual lifting along with the safe techniques to help eliminate musculoskeletal injuries.

Estimated Length of Course: 30 minutes

Meets *ISNetworld® safety training requirements   

Course Cost: 10 Credits

As low as $7.20 per employee

More details


NFPA 70E ISNet

Course Description: This course is based on *ISNetworld® safety program requirements to manage exposure to major electrical hazards in regards to NFPA 70E.

Course Objective: To provide employees with knowledge on how to reduce exposure to major electrical hazards such as shock, electrocution, arc flash, and arc blasts.

Estimated Length of Course: 20 minutes

 Meets *ISNetworld® safety training requirements

Course Cost: 10 Credits

As low as $7.20 per employee

More details


Noise Exposure/Hearing Conservation

Course Description: This course is based on general requirements of OSHA Standard 29 CFR 1926.52 (Occupation Noise Exposure) & 29 CFR 1926.101 (Hearing Protection).

Course Objective: Provides employee awareness of the hazards associated with Noise Exposure in the workplace and the protective measures that can be taken to protect their hearing. 

Estimated Length of Course: 40 minutes

Course Cost: 15 Credits

As low as $10.80 per employee

More details


Overhead Hoists

Course Description:This course is based on OSHA standards 29.CFR 1910.179 and 29.CFR 1926.554

Course Objective: To ensure all employees either using or working around various types of overhead material handling machines will understand the basic safety procedures.

Estimated Length of Course: 45 minutes

Meets *ISNetworld® safety training requirements

Course Cost: 15 Credits

As low as $10.80 per employee

More details


Permit Required Confined Space

Course Description: This course is based on OSHA standard 29 CFR 1910.146 and 1926.1204.

Course Objective: To ensure all employees are trained to follow the established guidelines and understand the procedures needed to protect yourself from the many types of hazards in confined spaces.

Estimated Course Length 79 minutes

Meets *ISNetworld® safety training requirements

Course Cost: 20 Credits

As low as $14.40 per employee

More details


Personal Protective Equipment (PPE)

Course Description: This course is based on OSHA Standard 29 CFR 1910 Subpart I, 1910.132, 1910.133, 1910.134, 1910.135, 1910.136, 1910.137, 1910.138, 1910.139, & 1910.140.

Course Objective: To inform employees about the potential hazards on the job site and to identify the proper PPE to be used to reduce or eliminate those hazards.

Estimated Length of Course: 25 Minutes

Course Cost: 10 Credits

As low as $7.20 per employee

More details


PSM/Contractor Responsibilities

Course Description: This course is based on OSHA standard 29 CFR 1910.119 (h).

Course Objective: To ensure all contract employees understand how to protect themselves from the hazards they may be exposed to when working in facility that has implemented a Process Safety Management Program. 

Estimate Course Length 34 minutes

Course Cost: 12 Credits

As low as $8.64 per employee

More details


Respiratory Protection

Course Description: This course is based on OSHA standard 29.CFR 1910.134

Course Objective: To ensure all employees understand the hazards that need respiratory protection as well as the type of protection required.

This training is required annually.

Estimated Length of Course: 70 minutes

Course Cost: 20 Credits

As low as $14.40 per employee

More details


Rigging for Material Handling

Course Description:This course is based on OSHA standard 29.CFR 1926.251

Course Objective: To ensure employees are aware of the established guidelines for the use and inspection of all rigging
components.

Estimated Length of Course: 45 minutes

Meets *ISNetworld® safety training requirements

Course Cost: 15 Credits

As low as $10.80 per employee

More details


Risk Assessment & Identification of Hazards

Course Description: This course is designed to help you recognize potential risks and hazards and the proper measures to protect yourself from them.

Course Objective: To communicate the employer's policy and procedures regarding assessing risks and identifying hazards.

Estimated Length of Course: 25 minutes

Meets *ISNetworld® safety training requirements

Course Cost: 10 Credits

As low as $7.20 per employee

More details


Scaffold Training

Course Description:This course is based on OSHA standard 29.CFR 1926.451-454

Course Objective: To ensure employees are
aware of the established guidelines for the use and inspection of all scaffold
components.

Estimated Length of Course: 45 minutes

Meets *ISNetworld® safety training requirements

Course Cost: 15 Credits

As low as $10.80 per employee

More details


Silica Exposure Training

Course Description: This course is based on OSHA's standard 29CFR 1926.1153 for Respirable Silica Dust Exposure.

Course Objective: To communicate the employer's policy and procedures regarding OSHA's new silica exposure standards

Estimated Length of Course: 65 minutes

Meets *ISNetworld® safety training requirements

Course Cost: 20 Credits

As low as $14.40 per employee

More details


Skid Steer Training

Course Description: This training will inform you of the OSHA regulations pertaining to a skid steer.

Course Objective: To ensure all employees are trained in the hazards associated with and the safe use of a skid steer.

Estimated Course Length 30 minutes

Course Cost: 12 Credits

As low as $8.64 per employee

More details


Slips, Trips and Falls Training

Course Description: This training will inform you of OSHA’s walking-working surfaces requirements and teach you to recognize and eliminate slips, trips, and fall hazards.

Course Objective: To ensure all employees are trained in recognizing slips, trips and falls hazards and how to protect yourself from them.

Estimated Course Length 38 minutes

Meets *ISNetworld® safety training requirements

Course Cost: 15 Credits

As low as $10.80 per employee

More details


Subcontractor Management Plan

Course Description: This course is designed for managers and supervisors who interact with subcontractors.

Course Objective: To explain how to effectively qualify your subcontractor laborers and implement safety practices.

Meets *ISNetworld® safety training requirements

Course Cost: 10 Credits

As low as $7.20 per employee

More details


Trenching, Shoring, & Excavation

Course Description: This course is based on OSHA Standard 29 CFR 1926.650, 1926.651 and 1926.652

Course Objective: To provide employees training in the protection of hazards resulting from excavations whether you are the excavator or one who is working in, on or near the excavation.

Estimated Course Length: 65 minutes

Course Cost: 20 Credits

As low as $14.40 per employee

More details


Welding, Cutting, & Hot Work

Course Description: This course is based on OSHA standard 29 CFR 1926 Subpart J 1926.350-354.

Course Objective: To ensure that employees are properly trained on the proper use of arc welding and cutting, oxygen-fuel welding and/or brazing equipment, and welding procedures and equipment.

Estimated Course Length 24 minutes

Course Cost: 10 Credits

As low as $7.20 per employee

More details


Questions? Find Your Answers Below

Online Training FAQs

  • Can I try a course before I buy credits?

    Yes. If you are current client, login to your account, click on the "Online Training" Tab and request your 50 Free Credits. If you are not a current client click on the "Online Training" Tab and complete the "Sign up for 50 Free Credits Form.

  • What are training credits?

    Training credits are used to purchase individual training courses. You purchase the number of credits you need and then use them to sign up for any course we offer.

      Try it Free!

      No Credit Card Necessary