Easily Manage Employee Safety Training

Sign Up and Try it For Free

Sign Up and Try it For Free

Schedule Employee Training that can be taken 24/7

Schedule Employee Training that can be taken 24/7

Track & Document Employee Progress

Track & Document Employee Progress

Current Courses

Abrasive Wheels

Course Description: This course is based on OSHA standard 29.CFR 1910.215 and 1926.303

Course Objective: To ensure all employees know how to eliminate all hazards related to abrasive wheel use.

Topics covered in this course include:

  • Abrasive Wheels
  • Proper Handling & Storage
  • The Hazards Abrasive Wheels Present
  • Practices and Procedures to Eliminate Abrasive Wheel Hazards

Meets *ISNetworldŽ safety training requirements   

Estimated Length of Course: 41 minutes

Course Cost: 15 Credits

As low as $10.80 per employee

More details


Aerial Lifts

Course Description: This course is based on OSHA standard 29 CFR 1926.453

Course Objective: To ensure all employees using aerial lifts understand how to safely operate the equipment in a work situation.

Topics covered in this course include:

  • Hazards Associated with Aerial Lifts
  • Training Requirements
  • What to do before operating an Aerial Lift
  • What to do while operating an Aerial Lift

Meets *ISNetworldŽ safety training requirements   

Estimated Length of Course: 15 minutes

Course Cost: 10 Credits

As low as $7.20 per employee

Now Available in Spanish!

More details


Benzene Awareness

Course Description: This course is designed to provide training regarding OSHA standard 29 CFR 1910.1028.

Course Objective: To communicate the hazards of benzene; where you may be occupationally exposed and steps to limit your exposure.

Topics covered in this course include:

  • Health hazards, exposure monitoring, medical requirements and training
  • Methods of protection, safe handling and use, emergency and first aid

Meets *ISNetworldŽ safety training requirements

Estimated Length of Course: 29 minutes

Course Cost: 10 Credits

As low as $7.2 per employee

More details


Bloodborne Pathogens

Course Description: This course is based on OSHA standards 29.CFR 1910.1030

Course Objective:To ensure all employees are knowledgeable in the protection against occupational exposure to blood and other potentially infectious materials.

Topics covered in this course include:

  • Training Information and Terminology
  • Explanation of risk and Exposure Control Plan
  • Recognizing a hazard exists and methods to protect yourself
  • What to do if there’s an exposure

This training is required annually.

Meets *ISNetworldŽ safety training requirements

Estimated Length of Course: 75 minutes

Course Cost: 20 Credits

As low as $14.40 per employee

More details


Box Cutter and Other Sharp Tools

Course Description: This course is to designed to train in the basic precautions for the safe use of sharp hand tools.

Course Objective: To ensure all employees are aware of the hazards associated with box cutters and other sharp hand tools.

Topics Included:

  • Hazard Identification
  • Tool Selection and Maintenance
  • Personal Protective Equipment
  • General Safety Precautions
  • Ergonomics of Cutting
  • First Aid

Estimated Length of Course: 27 minutes

Course Cost: 10 Credits

As low as $7.20 per employee

More details


CalOSHA Heat Illness

Course Description: This course is based on Cal-OSHA standard T8 CCR3395

Course Objective:To ensure all employees are aware of the signs and symptoms of heat illness and the requirements to prevent them.

Topics covered in this course include:

  • Environmental and personal risk factors
  • The employee’s access to water and shade
  • Weather monitoring and acclimatization
  • Procedures to follow in high heat situations
  • Procedures for when heat illness occurs, and
  • The heat illness prevention plan

Meets *ISNetworldŽ safety training requirements

Estimated Length of Course: 30 minutes

Course Cost: 12 Credits

As low as $8.64 per employee

More details


Cold Stress Prevention Training

Course Description: This course is designed for employee awareness of cold stress hazards and prevention.

Course Objective: To ensure all employees understand how to recognize the signs of cold stress on yourself and others and the procedures to reduce or eliminate the affects of cold on the body.

Topics covered in this course include:

  • Risk factors for cold stress
  • Effects of cold stress
  • Prevention of cold stress
  • Preparation for cold stress

Meets *ISNetworldŽ safety training requirements

Estimated Length of Course: 30 minutes

Course Cost: 10 Credits

As low as $7.20 per employee

More details


Compressed Gas Cylinders Training

Course Description: This course is to designed to train in the basic precautions for the safe transportation, storage, inspection and use of compressed gas cylinders.

Course Objective: To ensure all employees are aware of the hazards associated with compressed gas cylinders.

Topics covered in this course include:

  • The hazards associated with compressed gas cylinders.
  • The proper handling, storage and use of compressed gas cylinders

Meets *ISNetworldŽ safety training requirements

Estimated Length of Course: 35 minutes

Course Cost: 12 Credits

As low as $8.64 per employee

More details


Compressed Air & Pneumatic Tools

Course Description: This course is based on OSHA's standards 29 CFR 1910.101; 1910.242; 1910.169; 1926.302 and 1926.306.

Course Objective: Provide employees with the knowledge of hazards associated with compressed gases and tools operated by compressed air.

Topics Covered In Course:

  • General Procedures
  • Air Compressors and REceivers
  • Uses if Compressed Air
  • Potential Pneumatic Tool Hazards and Controls

Meets *ISNetworldŽ safety training requirements   

Estimated Length of Course: 45 minutes

Course Cost: 15 Credits

As low as $10.80 per employee

More details


Confined Spaces in Construction

Course Description: This course is based on OSHA standard 1926 Subpart AA

Course Objective:

  • Training Introduction & Terminology;
  • General requirements of the confined space standard;
  • Communication and coordination, and controlling hazards;
  • The permit-required confined space program
  • The permitting process and the roles of employees; and
  • Alternative entry procedures

Meets *ISNetworldŽ safety training requirements

Estimated Length of Course: 80 minutes

Course Cost: 20 Credits

As low as $14.40 per employee

Now Available in Spanish!

More details


Disciplinary Awareness Training

Course Description: This course is based onOSHA's requirement for employees to enforce employee safety.

Course Objective: To communicate the employer's policy and procedures regarding enforcement of employee safety.

Helps ensure employees are aware of how your disciplinary program works while providing management personnel responsible for program enforcement a complete understanding of the program so it is enforced equally and fairly to all employees.

Topics Covered In Training:

  • Disciplinary Program
  • Levels of Safety Violations
  • Examples of Violations
  • Enforcement Procedures
  • Enforcement Schedule
  • Supervisors Role

Meets *ISNetworldŽ safety training requirements

Estimated Length of Course: 25 minutes

Course Cost: 10 Credits

As low as $7.20 per employee

More details


Driving Safety and Company Vehicles

Course Description: This course is based on safe driving behavior.

Course Objective: To ensure all employees understand the promotion of safe driving behaviors as well as the company's safety policies regarding company vehicles.

Topics covered in this course include:

  • Safe Driving Practices
  • General policies regarding the use of company vehicles

Meets *ISNetworldŽ safety training requirements

Estimated Length of Course: 30 minutes

Course Cost: 10 Credits

As low as $7.20 per employee

More details


Drug and Alcohol-Free Workplace Training

Course Description: This course is designed to make aware of your company's drug and alcohol policy and the hazards produced by the use and misuse of drugs and alcohol.

Course Objective: To ensure all employees know their company's drug and alcohol policy and recognize the signs of use and/or misuse of drugs and alcohol.

Topics covered in this course include:

  • Your Company's Drug and Alcohol Policy
  • Substance Misuse
  • Commonly Misused Substances
  • How To Recognize Potential Substance Misuse Problems

Meets *ISNetworldŽ safety training requirements

Estimated Length of Course: 30 minutes

Course Cost: 10 Credits

As low as $7.20 per employee

More details


Electrical Safety Awareness

Course Description: This course is based on OSHA standard 29.CFR 1910 Sub Part S

Course Objective: To ensure all employees recognize the danger of electrical hazards and how to be protected from them.

Topics covered in this course include:

  • Terminology
  • Electrical Shock and Electrocution
  • Training Requirements
  • General Electrical Safety
  • Working Clearances
  • Electrical Work in Confined and Enclosed Spaces
  • Working Near Electrical Power

Meets *ISNetworldŽ safety training requirements

Estimated Length of Course: 50 minutes

Course Cost: 18 Credits

As low as $12.96 per employee

More details


Emergency Action Plan Training for Construction

Course Description: This course is based on OSHA standards 29.CFR 1926.35; 1926.64 and 1926.65.

Course Objective: To ensure all employees understand the required procedures if an emergency situation occurs at the job site.

Topics covered in this course include:

  • Elements of an emergency action plan
  • Training requirements

Meets *ISNetworldŽ safety training requirements   

Estimated Length of Course: 25 minutes

Course Cost: 10 Credits

As low as $7.20 per employee

More details


Emergency Action Plan Training for General Industry

Course Description: This course is based on
OSHA standards 29.CFR 1910.38; 1910.39.

Course Objective: To ensure all employees understand the required procedures if an emergency situation occurs at the job site.

Topics covered in this course include:

  • Elements of an emergency action plan
  • Training requirements

Meets *ISNetworldŽ safety training requirements   

Estimated Length of Course: 25 minutes

Course Cost: 10 Credits

As low as $7.20 per employee

More details


Eye Protection

Course Description: This course is designed to provide training regarding OSHA standards 29 CFR 1910.133 and 1926.102.

Course Objective: To familiarize you with the wide selection of eye and face protection to be able to select and use the appropriate protection.

Topics covered in this course include:

  • The many forms of available eye and face protection and how to select the correct type.
  • How to protect your eyes from specific hazards
  • Training requirements, Emergency response and Proper storage and maintenance.

Meets *ISNetworldŽ safety training requirements

Estimated Length of Course: 36 minutes

Course Cost: 12 Credits

As low as $8.64 per employee

More details


Fall Protection Training for Construction

Course Description: This course is based on OSHA standard 29 CFR 1926 Subpart M

Course Objective: To ensure that employees are made aware of when fall protection is required, methods to safeguard from falling at height, and how to properly use fall protection equipment.

Course Objective: To provide employees general knowledge on

  • Terminology
  • The requirements of employers to supply fall protection
  • Fall protection systems
  • and training requirements

Meets *ISNetworldŽ safety training requirements

Estimated Length of Course: 45 Minutes

Course Cost: 20 Credits

As low as $14.40 per employee

Now Available in Spanish!

More details


Fall Protection Training for General Industry

Course Description: This course is based on OSHA standards 29 CFR 1910.28-30.

Course Objective: To ensure all employees understand the required procedures in using fall protection at the workplace.

Topics covered in this course include:

  • Fall Protection Training Requirements
  • Where Fall Protection Must be Used
  • The Different Forms of Fall Protection

Estimated Length of Course: 40 minutes

Course Cost: 15 Credits

As low as $12.80 per employee

Now Available in English and Spanish!

More details


Fatigue Management Training

Course Description: This course is designed to help you recognize potential hazards from fatigue at the workplace and the proper ways to prevent fatigue from occuring.

Course Objective: To communicate the employer's policy and procedures regarding fatigue prevention.

Topics Covered In This Course Include:

  • Fatigue and its effects
  • Fatigue prevention
  • Fatigue management plan

Meets *ISNetworldŽ safety training requirements

Estimated Length of Course: 25 Minutes

Course Cost: 10 Credits

As low as $7.20 per employee

More details


Fire Safety Training

Course Description: This course is based on OSHA Standard 29 CFR 1926.150, 1926.252 & 1926.24

Course Objective: To provide employees general knowledge on fire protection and prevention, including use of fire extinguishers.

Topics Covered In This Course Include:

  • Fire Prevention Plan
  • Portable Fire Extinguishers
  • Fire Protection

Meets *ISNetworldŽ safety training requirements

Estimated Length of Course: 30 Minutes

Course Cost: 10 Credits

As low as $7.20 per employee

More details


First Aid Awareness

Course Description: This course is based on general requirements of OSHA Standard 29 CFR 1926.50

Course Objective: Provides employee awareness on proper procedures to take in performing First Aid in the workplace, and are familiar with the company's Emergency Action Plan.

Topics Covered In Training:

  • First Aid
  • First Aid Kits
  • First Aid and Risks Involved
  • Examples of First Aid
  • Examples of Injuries
  • Use of Corrosive Materials
  • Emergency Medical Response

Meets *ISNetworldŽ safety training requirements

Estimated course length: 20 minutes

Note: This is only a first aid awareness program and if you are to be put in a position as a first aid provider, you will need to complete certified CPR and First Aid Training that would also include Bloodborne Pathogens Training (Industrial Exposure Control).

Course Cost: 10 Credits

As low as $7.20 per employee

Now Available in Spanish!

More details


Forklift Operator Training (Powered Industrial Truck)

Course Description: This course is based on OSHA Standard 29 CFR 1910.178

Course Objective: To provide the forklift operators with the necessary training to meet OSHA regulatory requirements, including but not limited to:

  • Truck classes; hazardous environments and truck designations
  • Accidents; safe truck operations; stability and tipping over
  • Entering a trailer; fire and explosions; refueling; batteries; forklift to support scaffolding and maintenance.

This training is required every 3 years.

Estimated Course Length: 45 minutes

Note: Prior to issuance of certification, the operator trainee shall perform practical exercises while being evaluated by a person that has the knowledge, training, and experience to evaluate their competence.

Course Cost: 18 Credits

As low as $12.96 per employee

Now Available in English and Spanish

More details


General Waste Management

Course Description: This course is based on *ISNetworldŽ safety program requirements to manage the disposal of waste.

Course Objective: To provide employees with an awareness of general waste management procedures and outline the responsibilities of the General Waste Management Officer including, but not limited to:

  • Identifying PPE requirements
  • Ensuring the proper disposal of waste and the value of recycling
  • Identifying any special handling or disposal requirements
  • Identifying Safety Hazards

Meets *ISNetworldŽ safety training requirements

Estimated Course Length: 22 minutes

Course Cost: 10 Credits

As low as $7.20 per employee

More details


Ground Fault Protection GFCI

Course Description: This course is based on OSHA standards 29.CFR 1926.404(b).

Course Objective: To ensure all employees understand the procedures needed to protect them from an electrical ground fault by using ground fault circuit interrupters or an assured equipment grounding conductor
program.

Topics covered in this course include:

  • Assured Equipment Grounding Conductor Program
  • Ground fault circuit interrupters

Meets *ISNetworldŽ safety training requirements

Estimated Length of Course: 30 minutes

Course Cost: 12 Credits

As low as $8.64 per employee

More details


Hand & Power Tools

Course Description: This course is based on OSHA standard 29 CFR 1926 Subpart H, 1926.300-1926.302.

Course Objective: To ensure all employees are trained in the proper use of Hand and Portable Powered Tools on the job site including, but not limited to:

  • Tool Safety Training Introduction
  • Tool Safety Training Overview
  • Potential Hazards of Tools
  • Maintenance and Inspection of Tools
  • Use of Tools

Meets *ISNetworldŽ safety training requirements

Estimated Course Length: 23 minutes

Course Cost: 10 Credits

As low as $7.20 per employee

More details


Hazard Communication Including GHS

Course Description: This course is based on OSHA standard 29 CFR 1910.1200

Course Objective: To ensure that contractors are made aware of physical and health hazards present in the workplace as well as what protective measures to take to ensure safety among those hazards.

Our Hazard Communication - GHS course is aligned with the UN's Globally Harmonized System of Classification and Labeling of Chemicals.

Topics Covered In Course:

  • Hazardous Communication Definitions
  • SDS Information from GHS
  • Label Information from GHS
  • List of Hazardous Chemicals on Site
  • Non-Routine Task Training
  • Chemicals in Unlabeled Pipes
  • Sharing of Information with Outside Workers
  • Employers Responsibility for Minimum Training to Employees

Meets *ISNetworldŽ safety training requirements

Estimated Course Length 48 minutes

Course Cost: 15 Credits

As low as $10.80 per employee

Now Available in Spanish!

More details


Heat Illness Prevention

Course Description: This course is designed for employee awareness of heat illness hazards and prevention.

Course Objective: To ensure all employees understand how to recognize the signs of heat stress on yourself and others and the procedures to prevent the affects of heat on the body.

Topics covered in this course include:

  • Terminology
  • Environmental and personal risk factors
  • access to water and shade
  • Weather monitoring and acclimatization
  • High heat situations
  • Heat Illness Prevention Plan

Meets *ISNetworldŽ safety training requirements

Estimated Length of Course: 30 minutes

Course Cost: 10 Credits

As low as $7.20 per employee

More details


Hydrogen Sulfide H2S Awareness Training

Course Description: This course is based on OSHA Standard 29 CFR 1910.1000 and 1926.55.

Course Objective: To provide employees with the necessary training to meet OSHA regulatory requirements, including but not limited to:

  • Health and Safety Hazards Associated with H2S Gas
  • Training Required
  • Evaluation and Control of H2S
  • Emergency Procedures

Meets *ISNetworldŽ safety training requirements   

Estimated course length: 25 minutes

Course Cost: 10 Credits

As low as $7.2 per employee

More details


Incident Investigation

Course Description: This course is designed to show you how to use a 4 step approach to incident investigation.

Course Objective: To communicate the employer's policy and procedures regarding incident investigations.

Topics covered in this course include:

  • How to establish a system approach to incident investigation
  • Analysis of the 4 step incident investigation process

Meets *ISNetworldŽ safety training requirements

Estimated Length of Course: 32 minutes

Course Cost: 12 Credits

As low as $8.64 per employee

More details


Ladder Safety

Course Description: This course is based on OSHA Standard 29 CFR 1926.1053

Course Objective: To ensure all employees are trained in the proper use of ladders on the job site including, but not limited to:

  • Ladder Safety Introduction
  • Specific Fall Protection Procedures
  • Ladder Safety and Electrical Hazards
  • Fixed Ladder Safety Requirements
  • Ladder Inspection

Meets *ISNetworldŽ safety training requirements

Estimated Course Length 26 minutes (Spanish 30 minutes)

Course Cost: 12 Credits

As low as $8.64 per employee

Now Available in Spanish!

More details


Lockout Tagout

Course Description: This course is based on OSHA standard 29 CFR 1910.147

Course Objective: To ensure that employees are made aware of how to be in compliance with OSHA's standard on the control of hazardous energy, one of the most commonly violated standards.

We want to help educate and protect your employees by:

  • Explaining when and where the standard applies
  • Lockout/Tagout procedures for energy control
  • Responsibilities of authorized, affected and other employees
  • The differences between lockout and tagout
  • Best safety practices to apply

Meets *ISNetworldŽ safety training requirements

Estimated Course Length: 65 minutes

Course Cost: 18 Credits

As low as $12.96 per employee

Now Available in Spanish!

More details


Manual Lifting

Course Description: This course is based on correct manual lifting techniques.

Course Objective: To ensure all employees understand how to identify the hazards of manual lifting along with the safe techniques to help eliminate musculoskeletal injuries.

Topics covered in this course include:

  • Assessing manual lifting hazards
  • Training Requirements
  • Implementing solutions to control hazards
  • Lifting techniques
  • Ergonomics
  • Reporting & evaluating injuries

Meets *ISNetworldŽ safety training requirements

Estimated Length of Course: 30 minutes

Course Cost: 10 Credits

As low as $7.20 per employee

More details


NFPA 70E ISNet

Course Description: This course is based on *ISNetworldŽ safety program requirements to manage exposure to major electrical hazards.

Course Objective: To provide employees with knowledge on how to reduce exposure to major electrical hazards such as shock, electrocution, arc flash, and arc blasts. Topic covered in this course include:

  • NFPA 70E Training Requirements
  • Host & Contract Employer Responsibilities
  • Test Instruments & Equipment
  • PPE Use and Maintenance
  • Safety Procedures for Working Around Electric Sources

Meets *ISNetworldŽ safety training requirements

Estimated Length of Course: 20 minutes

Course Cost: 10 Credits

As low as $7.20 per employee

More details


Noise Exposure/Hearing Conservation

Course Description: This course is based on general requirements of OSHA Standard 29 CFR 1926.52 (Occupation Noise Exposure) & 29 CFR 1926.101 (Hearing Protection).

Course Objective: Provides employee awareness of the hazards associated with Noise Exposure in the workplace and the protective measures that can be taken to protect their hearing.

Topics Included:

  • Employer Responsibilities
  • Employee Responsibilities
  • Training Requirements
  • Noise Induced Hearing Loss
  • Hearing Protectors
  • Noise Monitor Procedures
  • Noise Level Monitoring
  • Audiometric Testing Program

Meets *ISNetworldŽ safety training requirements

Estimated Length of Course: 40 minutes

Course Cost: 15 Credits

As low as $10.80 per employee

More details


Overhead Hoists

Course Description: This course is based on
OSHA standards 29.CFR 1910.179 and 29.CFR 1926.554

Course Objective: To ensure all employees
either using or working around various types of overhead material handling machines will understand the basic safety procedures.

Topics covered in this course include:

  • Safe Operating Procedures
  • Pre-operating Inspections
  • Proper Rigging and Lifting
  • Moving and Placing a Load Safely

Meets *ISNetworldŽ safety training requirements

Estimated Length of Course: 45 minutes

Course Cost: 15 Credits

As low as $10.80 per employee

More details


Pandemic Preparedness w/COVID-19

Course Description: This course is based on OSHA standard 29 CFR 1910.1030

Course Objective: To ensure that employees are made aware of physical and health hazards present in the workplace during a pandemic and what to do in the event of exposure..

Topics Covered In Course:

  • What is a Pandemic?
  • Phases of the Pandemic Alert System
  • Work Policies for a Pandemic
  • What is COVID-19?
  • Work Policies for COVID-19

Meets *ISNetworldŽ safety training requirements

Estimated Length of Course: 45 minutes

Course Cost: 15 Credits

As low as $10.80 per employee

Available in English and Spanish

More details


Permit Required Confined Space

Course Description: This course is based on OSHA standard 29 CFR 1910.146 and 1926.1204.

Course Objective: To ensure all employees are trained to follow the established guidelines and understand the procedures needed to protect yourself from the many types of hazards in confined spaces.

Estimated Course Length 79 minutes

Meets *ISNetworldŽ safety training requirements

Course Cost: 20 Credits

As low as $14.40 per employee

More details


Personal Protective Equipment for Construction

Course Description: This course is based on OSHA Standard 29 CFR 1926 Subpart E, 1926.28, 1926.52, 1926.95, 1926.96, 1926.100, 1926.101, 1926.102 & 1926.107

Course Objective: To inform employees about the potential hazards on the job site and to identify the proper PPE to be used to reduce or eliminate those hazards, including but not limited to:

  • Hazard Assessment & PPE Selection
  • Paying for PPE
  • Sizing and Fitting
  • Care and Maintenance
  • When Use and What Types
  • Protection Related To: Hand, Foot, Respiratory, Eye & Face, Head & Hearing

Meets *ISNetworldŽ safety training requirements

Estimated Length of Course: 25 Minutes

Course Cost: 10 Credits

As low as $7.20 per employee

Available in English and Spanish!

More details


Personal Protective Equipment for General Industry

Course Description: This course is based on OSHA Standard 29 CFR 1910 Subpart I, 1910.132, 1910.133, 1910.134, 1910.135, 1910.136, 1910.137, 1910.138, 1910.139, & 1910.140.

Course Objective: To inform employees about the potential hazards on the job site and to identify the proper PPE to be used to reduce or eliminate those hazards.

Meets *ISNetworldŽ safety training requirements   

Estimated Length of Course: 25 Minutes

Course Cost: 10 Credits

As low as $7.20 per employee

Coming Soon in Spanish!

More details


PSM/Contractor Responsibilities

Course Description: This course is based on OSHA standard 29 CFR 1910.119 (h).

Course Objective: To ensure all contract employees understand how to protect themselves from the hazards they may be exposed to when working in facility that has implemented a Process Safety Management Program including, but not limited to:

  • Responsibilities as a Contract Employer
  • Safety Data Sheets
  • Performing Hot Work
  • Facility Hazards and Emergency Action Plan (EAP)
  • OSHA Compliance Safety Programs
  • Accidents and Near Misses
  • Management of Change

Meets *ISNetworldŽ safety training requirements

Estimate Course Length 34 minutes

Course Cost: 12 Credits

As low as $8.64 per employee

More details


Respiratory Protection

Course Description: This course is based on OSHA standard 29.CFR 1910.134

Course Objective: To ensure all employees understand the hazards that need respiratory protection as well as the type of protection needed.

Topics covered in this course include:

  • Terminology
  • Training Requirements
  • Respiratory Protection Program
  • Selection of Respirator
  • Medical Evaluation
  • Fit Test
  • Respirator Use
  • Care of Respirator
  • Breathing Air Quality
  • Program Evaluation
  • Recordkeeping

This training is required annually.

Meets *ISNetworldŽ safety training requirements

Estimated Length of Course: 70 minutes

Course Cost: 20 Credits

As low as $14.40 per employee

More details


Rigging for Material Handling

Course Description: This course is based on
OSHA standards 29.CFR 1926.251

Course Objective:To ensure employees are aware of the established guidelines for the use and inspection of all rigging components.

Topics covered in this course include:

  • General Requirements for Rigging
  • Slings in Material Handling
  • Shackles and Hooks
  • Rigging of a Personnel Platform

Meets *ISNetworldŽ safety training requirements

Estimated Length of Course: 45 minutes

Course Cost: 15 Credits

As low as $10.80 per employee

More details


Risk Assessment & Identification of Hazards

Course Description: This course is designed to help you recognize potential risks and hazards and the proper measures to protect yourself from them.

Course Objective: To communicate the employer's policy and procedures regarding assessing risks and identifying hazards.

Topics covered in this course include:

  • The Risk Assessment and Hazard Identification
  • Hazard Control Measures

Meets *ISNetworldŽ safety training requirements

Estimated Length of Course: 25 minutes

Course Cost: 10 Credits

As low as $7.20 per employee

More details


Scaffold Training

Course Description: This course is based on
OSHA standards 29.CFR 1926.451-454.

Course Objective:To ensure employees are aware of the established guidelines for
the use and inspection of all scaffolds and their components, including but not limited to:

  • Terminology and Training Requiurements
  • General Requirements for Scaffold Use
  • Platform Construction
  • Scaffold Access
  • Supported and Suspended Scaffold Guidelines
  • Electrical, Employee Falls and Falling Objects Hazards

Meets *ISNetworldŽ safety training requirements

Estimated Length of Course: 45 minutes

Course Cost: 15 Credits

As low as $10.80 per employee

Now Available In Spanish!

More details


Silica Exposure Training

Course Description: This course is based onOSHA's standard 29CFR 1626.1153 for Respirable Silica Dust Exposure.

Course Objective: To communicate the employer's policy and procedures regarding OSHA's new silica exposure standards by explaining the hazards, who needs to be protected and how this protection is established.

Topics Covered In Training:

  • Terminology
  • Exposure Control Plan
  • Communication of Silica Hazards
  • Specific Exposure Control Methods
  • Alternative Exposure Control Methods
  • Housekeeping
  • Respiratory Protection
  • Medical Surveillance
  • Recordkeeping

Meets *ISNetworldŽ safety training requirements

Estimated Length of Course: 65 minutes

Course Cost: 20 Credits

As low as $14.40 per employee

More details


Skid Steer Training

Course Description: This training will inform you of the OSHA regulations pertaining to a skid steer.

Course Objective: To ensure all employees are trained in the hazards associated with and the safe use of a skid steer.

Course Topics

  • Hazards of skid steer loaders
  • Safety features of a skid steer loaded
  • Training requirements
  • Pre-work inspections and maintenance
  • Safe use

Estimated Course Length 30 minutes

Course Cost: 12 Credits

As low as $8.64 per employee

More details


Slips, Trips and Falls Training

Course Description: This training will inform you of OSHA’s walking-working surfaces requirements and teach you to recognize and eliminate slips, trips, and fall hazards.

Course Objective: To ensure all employees are trained in recognizing slips, trips and falls hazards and how to protect yourself from them.

Estimated Course Length 38 minutes

Meets *ISNetworldŽ safety training requirements

Course Cost: 15 Credits

As low as $10.80 per employee

More details


Subcontractor Management Plan

Course Description: This course is designed for managers and supervisors who interact with subcontractors.

Course Objective: To explain how to effectively qualify and implement safety practices of subcontractors working on your job site including, but not limited to:

  • Obtaining the Qualifications of Subcontract Workers
  • Providing and Implementing a Safety Program for Subcontract Employees.

Meets *ISNetworldŽ safety training requirements

Estimated Course Length 25 minutes

Course Cost: 10 Credits

As low as $7.20 per employee

More details


Trenching, Shoring, & Excavation

Course Description: This course is based on OSHA Standard 29 CFR 1910.178

Course Objective: To provide employees involved in excavations with the necessary training to meet OSHA regulatory requirements, including but not limited to:

  • Training Introduction and Requirements
  • Trench Failure and Soil Classifications
  • Protective Measures
  • Special Health & Safety Considerations

Meets *ISNetworldŽ safety training requirements   

Estimated Course Length: 65 minutes

Course Cost: 20 Credits

As low as $14.40 per employee

More details


Welding, Cutting, & Hot Work

Course Description: This course is based on OSHA standard 29 CFR 1926 Subpart J 1926.350-354.

Course Objective: To ensure that employees are properly trained on the proper use of arc welding and cutting, oxygen-fuel welding and/or brazing equipment, and welding procedures and equipment, including but not limited to:

  • Training Requirements
  • Compressed Gas Cylinder User
  • Arc Welding Precautions
  • General Precautions
  • PPE
  • Heating Metals of Toxic Significance
  • Hot Work Permit
  • Fire Watch

Meets *ISNetworldŽ safety training requirements

Estimated Course Length 24 minutes

Course Cost: 10 Credits

As low as $7.20 per employee

More details


Questions? Find Your Answers Below

Online Training FAQs

  • Can I try a course before I buy credits?

    Yes. If you are current client, login to your account, click on the "Online Training" Tab and request your 50 Free Credits. If you are not a current client click on the "Online Training" Tab and complete the "Sign up for 50 Free Credits Form.

  • What are training credits?

    Training credits are used to purchase individual training courses. You purchase the number of credits you need and then use them to sign up for any course we offer.

      Try it Free!

      No Credit Card Necessary